UNI-T UT50C Spécifications télécharger pdf (Page 22)

Model UT50D: OPERATING MANUAL

Measurement Operation(10)

l For testing the capacitor with polarity, connect the

red test lead or test clip to anode & black test lead

or test clip to cathode

l When the tested capacitor is shorted or the capacitor

value is overloaded, the LCD display “1”.

l To minimize the measurement error caused by the

distributed capacitor, the testing lead or testing clip

should be as short as possible.

l To ensure precision especially when measuring small

capacitance 200nF range, the correct reading is as

follows:

Measurement displayed reading minus the Meter’s

open circuit displayed value.

l It is normal to take a while for zeroing when changing

over the measurement range. This process will not

affect the accuracy of the final readings obtained.

30V

1 2 ... 17 18 19 20 21 22 23 24 25 26 27 ... 35 36

Renda Boček 22 Jan 2025 | 06:45:39

UNI-T UT50C Spécifications Page 22