UNI-T UT206A Spécifications télécharger pdf (Page 22)

I. Model UT206: Temperature Measurement

(See figure 11)

The temperature measurement range is -40˚C~1000˚C. To measure

temperature, connect the Meter as follows:

1. Insert the red temperature probe into the

HzΩ terminal 

and the black temperature probe into the COM terminal.

2. Set the rotary switch to ˚C.

3. Place the temperature probe to the object being measured.

The measured value shows on the display.

Note

• The Meter automatically displays the temperature value inside the 

Meter when there is no temperature probe connection.

• The included point contact temperature probe can only be used up 

to 250˚C. For any measurement higher than that, the rod type 

temperature probe must be used instead.

• When temperature measurement has been completed, disconnect the 

connection between the testing leads and the circuit under test, and 

remove the testing leads away from the input terminals of the Meter.

Measurement Operation (9)

Model UT205/UT206: OPERATING MANUAL

1 2 ... 17 18 19 20 21 22 23 24 25 26 27 ... 32 33

Pas de commentaire

UNI-T UT206A Spécifications Page 22