UNI-T UT206A Spécifications télécharger pdf (Page 21)

H. Measuring Duty Cycle (See figure 10)

The duty cycle measurement range is: 0.1%~99.9%. To measure duty

cycle, do the following:

1. Set up the Meter to measure frequency.

2. To select duty cycle, press Hz until the % symbol is shown on the 

display.

3. Connect the test leads across with the object being measured.

The measured value shows on the display.

Note

• The LCD displays 000.0% indicating the input signal is high or low 

level.

• When duty cycle measurement has been completed, disconnect the 

connection between the testing leads and the circuit under test, and 

remove the testing leads away from the input terminals of the Meter.

Measurement Operation (8)

red

black

Model UT205/UT206: OPERATING MANUAL

1 2 ... 16 17 18 19 20 21 22 23 24 25 26 ... 32 33

Pas de commentaire

UNI-T UT206A Spécifications Page 21