UNI-T UT805 Spécifications télécharger pdf (Page 30)

Model UT805: OPERATING MANUAL

on the component’s anode and place the black test

lead on the component’s cathode.

The measured value shows on the primary display

and the secondary display shows 6.000V range.

Note

Connect the test leads to the proper terminals as

said above to avoid error display. The primary display

shows OL indicating diode being tested is open or

polarity is reversed. The unit of diode is Volt (V),

displaying the forward voltage drop readings.

Open circuit voltage is around 2.8V.

When diode testing has been completed, disconnect

the connection between the testing leads and the

circuit under test, and remove the testing leads away

from the input terminals of the Meter.

1 2 ... 25 26 27 28 29 30 31 32 33 34 35 ... 63 64

Pas de commentaire

UNI-T UT805 Spécifications Page 30