UNI-T UT211 Spécifications télécharger pdf (Page 16)

C. Measuring Resistance (see figure 5)

red black

figure 5

Warning

To avoid damages to the Meter or to the devices

under test, disconnect circuit power and discharge

all the high-voltage capacitors before measuring

resistance.

When the Meter working at an effective voltage

over 60V in DC or 30V in AC, special care should

be taken for there is danger of electric shock.

To measure resistance, connect the Meter as

follows:

1. Insert the red test lead into the terminal and

the black test lead into the COM terminal.

2. Connect the test leads across with the object

being measured.

The measured value shows on the display.

Model UT211: OPERATING MANUAL

1 2 ... 11 12 13 14 15 16 17 18 19 20 21 ... 29 30

Pas de commentaire

UNI-T UT211 Spécifications Page 16